Cannot connect to opendchub

[Guest]

I like CZDC++ very much, and would like to use the newer versions, but i need to connect to a hub with opendchub-soft. and its impossible.
I think it is since the 0.4032 versions.

anybody knows something about this?

[shufty]

should really call it "closeddchub" then huh

[PPK]

I don't find any problem to connect to opendchub 0.7.14 with CZDC++ 0.666[D]    

[Guest]

Well The problem is, i can connect. but i disconnect in the same second i connected.

[00:02:07] *** Connected
[00:02:07] <Hub-Security> This hub is running version 0.7.14 of Open DC Hub.
[00:02:07] <Hub-Security> Your nickname is registered, please supply a password.
[00:02:07] *** Stored password sent...
[00:02:07] <Hub-Security> Logged in
.
.
.
[00:02:07] *** Disconnected

And from the View of an other Client( i called the user CZDC666d):

[00:02:07] *** Joins: CZDC666d
[00:02:08] *** Parts: CZDC666d

The HUB itselfs seems not to drop this client.

With standard DC++ and an other mod-Client, 0.668 too, i can connect to this HUB without any problems.

[PPK]

Code Select Expand

[00:49:18] $Lock Sending_key_isn't_neccessary,_key_won't_be_checked. Pk=Same_goes_here.
[00:49:18] $HubName Grobix Test DC Hub
[00:49:18] <Hub-Security> This hub is running version 0.7.14 of Open DC Hub.
[00:49:20] $Hello PPK
[00:49:20] $To: PPK From: Hub $This is a development test hub, use at your own risk.
This hub may be going up and down without any notice.

Otherwise enjoy your stay, and do not share copyrighted
material unless you are the copyright holder.
[00:49:20] Private message from Hub: This is a development test hub, use at your own risk.
This hub may be going up and down without any notice.

Otherwise enjoy your stay, and do not share copyrighted
material unless you are the copyright holder.
[00:49:20] $MyINFO $ALL PPK A<++ V:0.668,M:A,H:1/0/0,S:1>$ $Cable $$4307987099$
[00:49:23] $NickList shay$$djtitus$$ukdriver$$johnw$$marialinneasjodin$$lmo-psv$$LemonJelly(USA)$$erdem$$PPK$$Smaardmaard!!$$+++++$$[telia]Nandorf$$(DKDUMBO)$$OldBelial$$
[00:49:23] $OpList
[00:49:24] $Search 217.215.15.33:412 F?F?0?2?castrum$mysterious
[00:49:24] $MyINFO $ALL shay <++ V:0.401,M:P,H:15/0/0,S:6>$ $56Kbps
$$26433961557$
[00:49:24] $MyINFO $ALL djtitus <DC V:2.02,M:A,H:1/1/0,S:6,O:3>$ $Cable
$$330850304$
[00:49:24] $MyINFO $ALL ukdriver good music and good pic's and cover<++ V:0.668,M:P,H:15/0/0,S:5,O:1>$ $Cable
$$10685394120$
[00:49:24] $MyINFO $ALL johnw <++ V:0.668,M:A,H:1/0/0,S:2>$ $Cable
$$250689123$
[00:49:24] $MyINFO $ALL marialinneasjodin <++ V:0.4033,M:P,H:3/0/0,S:1>$ $DSL
$evamaria_sjodin@hotmail.com$1352666815$
[00:49:24] $MyINFO $ALL lmo-psv movies<oDC V:5.31,M:P,H:30/0/0,S:6>$ $Cable
$$16872541410$
[00:49:24] $MyINFO $ALL LemonJelly(USA) <DCGUI V:0.3.5cvs20041226,M:A,H:3,S:6>$ $Cable
$$73148025289$
[00:49:24] $MyINFO $ALL erdem <++ V:0.4033,M:P,H:11/0/0,S:20,O:5>$ $DSL
$$126872844$
[00:49:24] $MyINFO $ALL PPK A<++ V:0.668,M:A,H:1/0/0,S:1>$ $Cable $$4307987099$
[00:49:24] $MyINFO $ALL Smaardmaard!! <++ V:0.4034,M:P,H:8/0/0,S:3,O:3>$ $Cable
$$4507820508$
[00:49:24] $MyINFO $ALL +++++ <++ V:0.4034,M:A,H:141/0/0,S:1>$ $LAN(T3)
$$3716219746$
[00:49:24] $MyINFO $ALL [telia]Nandorf <++ V:0.4033,M:P,H:17/0/0,S:1,O:1>$ $DSL
$grymjeppe@hotmail.com$7183628304$
[00:49:24] $MyINFO $ALL (DKDUMBO) <++ V:0.305,M:P,H:30/0/0,S:2>$ $LAN(T3)
$$106869882989$
[00:49:24] $MyINFO $ALL OldBelial MP3 only$ $DSL$belial_61@hotmail.com$122805647720$
[00:49:28] <PPK> .
[00:49:28] $MyINFO $ALL LemonJelly(USA) <DCGUI V:0.3.5cvs20041226,M:A,H:3,S:6>$ $Cable
$$73148025289$

No disconnect here    

[Guest]

Well I must have made a mistake in the configs of CZDC++.
cause can't connect to the same HUB you have just connected.

Code Select Expand


[01:22:01] *** Connected
[01:22:01] <Hub-Security> This hub is running version 0.7.14 of Open DC Hub.
[01:22:02] Private message from Hub: This is a development test hub, use at your own risk.
This hub may be going up and down without any notice.

Otherwise enjoy your stay, and do not share copyrighted
material unless you are the copyright holder.
[01:22:02] *** Joins: CZDC666d
[01:22:02] *** Disconnected


thx ppk for your help, even if there is no solution till now.
It is not the HUBsoft and not the CZDC ;)
but its very strange

[Mickey]

Exit your client, delete DCPlusPlus.xml from your client folder and restart your client and check if you can enter.

[Guest]

@Mickey: Still the same problem.
:(

[PPK]

I make some test and find old known bug of opendchub.. user with some connection type (ones not available on old Direct Connect like Modem or Wireless) is disconnected  

[Guest]

Yes i no this, but this seems not to be this problem. I tried cable, modem and dsl. all3 didn't work.

but look at this HUBsoft-log:

Code Select Expand


Jan  2 03:01:10 Registered user CZDC666d logged in from xxx.xxx.xxx.xxx
Jan  2 03:01:10 PID: 30900 Received command from forked_process, type 0x80: $Hello CZDC666d|
Jan  2 03:01:10 PID: 30901 Received command from xxx.xxx.xxx.xxx, type 0x8: $MyPass xyz|
Jan  2 03:01:10 PID: 30900 Received command from forked_process, type 0x80: $Quit CZDC666d|


the connection is explicitly closed by the client :/

if it can help you, i connect from a LAN through a router, probably some IP-Translation or compare errors?

[PPK]

the connection is explicitly closed by the client :/

It looks like hub close connection after bad pass   I don't have any opendchub where i am registered to test...

[Guest]

cause can't connect to the same HUB you have just connected.

Code Select Expand


[01:22:01] *** Connected
[01:22:01] <Hub-Security> This hub is running version 0.7.14 of Open DC Hub.
[01:22:02] Private message from Hub: This is a development test hub, use at your own risk.
This hub may be going up and down without any notice.

Otherwise enjoy your stay, and do not share copyrighted
material unless you are the copyright holder.
[01:22:02] *** Joins: CZDC666d
[01:22:02] *** Disconnected


But the same happens when i connect to a hub without regusers.

[Guest]

sorry, everythings fine.
Forgot, that CZDCPlusPlus changes the Connection to 'Netlimiter' if the Netlimiter is on.
So the HUBSoft disconnected the Client, because of unknown connection-type.